|
|
|
 |
Products |
|
|
 |
EPON OLT(GWT-EOLT1000) |
 GWT-EOLT1000
|
|
Product
Applications: |
|
|
GWT-EOLT1000 Converter is designed to make conversion
between 10/100/1000Base-T and EPON Optical Line Terminals (OLT)
fiber Ethernet in the CO site conversion chassis. With web-based
management and CLI (command line interface), the network administrator
can logon the converter to monitor, configure and control the
activity of each port. In addition, the EPON converter implements
bandwidth rating management capability via the intelligent software.
The overall network management is enhanced, and the network
efficiency is also improved to accommodate and deliver high
bandwidth applications.
|
|
Product
Features: |
|
＃Supports one 10/100/1000Base-T Gigabit Ethernet
UTP port and one Gigabit Ethernet-PON Fiber port
＃Supports Gigabit Ethernet-PON IEEE 802.3ah compliance
＃Supports IEEE 802.3ah OAM function
＃Supports 802.3z Gigabit Ethernet local-side interface
＃Supports dynamic bandwidth allocation (DBA)
＃Supports 4K MAC address learning and aging on local interface
＃Supports 802.1p with 4 priority queues per LLID link
＃Supports 802.1Q VLAN mapping to LLID
＃Supports per-LLID/customer encryption and decryption for
security
＃Assurance of security for subscribers
Encryption in the PON layer assures security between subscribers.
＃Supports 256 LLIDs in each of downstream and upstream direction
＃Supports local and remote loop-back test
＃Supports each converter module media configured and monitored
ability:
Supports port state enabled/disabled
Supports auto-negotiation/forced mode
Supports port speed and duplex mode
Supports flow control enabled/disabled
＃Supports wire speed packet forwarding ability as below:
10Base : 14880 pps
100Base: 148800 pps
1000Base: 1413600 pps
(64Bytes up to 95% utilization)
(1518Bytes up to 97% utilization)
＃Supports EPON module per port basic counters for traffic
raw data monitor of fiber and TP port. as below:
Octets transferred
Total Frames transferred
Unicast Frames transferred
Broadcast Frames transferred
Multicast Frames transferred
CRC-32 Errors
Undersize Frames
Oversize Frames
Collisions
64 Octet Frames
65-127 Octet Frames
128-255 Octet Frames
256-511 Octet Frames
512-1023 Octet Frames
1024-1518 Octet Frames
1519+ Octet Frames
Frames dropped (queue overflow)
Pause Frames
＃Supports statistics Rising/Falling threshold for alarm
＃Supports configurable OLT alarm log function
＃Supports RMON counters for port traffic quality monitoring
function
＃Supports IGMP proxy function
＃Supports max packet length: 1536 bytes
＃Supports module firmware upgrade
＃Supports Module Information (S/N, MAC, Model Name,´.)
＃Supports module per port basic LEDs for monitoring
＃Supports media type, connector, wavelength and distance information
＃Supports hot-swap and auto reload configuration ability
＃The center unit automatically scans and records ID information
from subscriber systems.
＃RoHS Compliance
＃Working Time Without Any Trouble Is More Than 50 Thousand
|
|
Product
Specifications: |
|
| Standards
|
IEEE802.3u 100Base-TX,
IEEE802.3z/ab 1000Base-T, IEEE802.3ah 1000Base-PX-U
(EPON) |
| Fiber Type |
SC/PC
|
Port
|
RJ-45 Port |
|
Network Cable |
Cat. 5 cable and up to
100m |
1000Base-PX-U:8.3/125,8.7/125,9/125,10/125μm
Single-Mode (20Km) |
| LED Indicators |
PWR,EPON LNK,ACT,TP LNK/ACT,SPD |
| Data Transfer Rate |
Upstream: Max. Up to 950 Mbps |
| Downstream: Max. Up to 970 Mbps |
| Dimensions(DxH) |
275x132.2mm |
Input Voltage
|
AC100V-AC240V and DC-48V is optional ( Internal power
) |
Operational Temperature
|
0 ≧ ~70 ≧ |
| Store Temperature |
-40 ≧ ~80 ≧ |
Humidity
|
5%~95% no coagulation |
|
| |
|
